Alucom LF 500 system (Longfloors) – facing a composite material with fastening the system in floor slabs

Alucom LF 500 — an aluminum facing structure, with fastening floor slabs only.

The system is designed for the buildings, where it is impossible to use the classical scheme of attachment to the bearing walls, due to the low load-bearing capacity of the walls (foam , gas silicate , slotted brick), and it is possible to mount only in the inner lining made of concrete.

Guaranteed composition of alloy of all elements of the system — A 6063 T6, provides a range of standoffs from the wall from 250 mm to 320 mm . As cladding cassette type is used with concealed fastening. Cassettes are made of aluminum composite material, related to the group of difficult to combustible materials or aluminum sheet with thickness up to 4mm .

In the system Alucom LF 500 the panel is fastened by the lock, formed by the combination of the sliding bracket (bracket ) and the angle connector of the cassette. While sliding brackets (brackets ) are mounted as mirror relative to each other , locking the liner cassette into thrust . This mounting method provides high reliability of fixing of the facing panel.

System Features:

Unique patented spatial bracket construction and rail.
The ratio of the weight loads to the strength is unparalleled in this segment.
Reliability of fastening of the entire structure through the use of bolting bracket and rail.
Corner amplifier (tube) has two functions of angular amplifier and mating slide.
In the assembly of cassettes considerably less riveting than similar structures is used, there is no loss of time for marking the mounting points, because the unnecessarily marking operation is missing.
Reducing of installation time due to ease of assembly.
Additional rigidity of the system through the use of the latch, which connects the cassettes together.

Get a catalog of technical solutions ×

Download album of technical solutions